Quick

  • HOME

[114992370]Acrylic Case for Jetson Nano B01 with Cooling Fan, Dual Antenna Mounts, Power/FR/RESET Buttons

Acrylic Case for Jetson Nano B01 with Cooling Fan, Dual Antenna Mounts, Power/FR/RESET Buttons
  • [114992370]Acrylic Case for Jetson Nano B01 with Cooling Fan, Dual Antenna Mounts, Power/FR/RESET Buttons

    보여지는 사진은 제품을 대표적으로 묘사하는 사진입니다. 정확한 규격은 제품의 데이터시트에서 확인하셔야 합니다.

      • 해외
    • 소비자가
      견적문의요망
    • 상품코드
      P013158969
    • 제 조 사
      seeedstudio
    • 마일리지
      100 IC
      마일리지 INFO

      마일리지 적립금은 상품 구매시 적립되는 형태가 아닌, 프로모 션 진행 시 혜택으로 적립되는 형태입니다. 자세한 관 련 내용을 보시려면 마이페이지>마일리지 메뉴에서 확 인하세요!

    • 배송기간
      1주이내
    • 재고위치
      해외 재고
    • 최소구매수량
      1개
  • 이 상품의 상품코드는 P013158969 입니다.

    [114992370]Acrylic Case for Jetson Nano B01 with Cooling Fan, Dual Antenna Mounts, Power/FR/RESET Buttons

    Features

    • Provides protection with transparent acrylic case
    • Internal cooling fan for better heat dissipation
    • Dual antenna mounts to install additional external antennas
    • Power, Reset and Factory Reset buttons for convenient control
    • Carefully laid out cutouts for easy access to board peripherals
    • Easily accessible Jetson Nano GPIO using side openings?
    • Dual camera holders placed on top of the case

    Description

    This is a?transparent acrylic case?that can provide protection for your Jetson Nano. It has an internal cooling fan to provide better heat dissipation when you use your Jetson Nano for more demanding tasks. Also, the dual antenna mounts allow you to install additional external antennas to experience better wireless signal strength. However, these antennas are not included in the package. The case comes with three additional buttons that can be used to power, reset and factory reset your Jetson Nano very easily. There are two camera holders on top of the case, and you can connect cameras that are supported by Jetson Nano to realize machine vision projects. Also, you can easily access the Jetson Nano GPIO using the side openings of this case.

    attention icon

    Note

    Jetson Nano Developer Kit, antennas and cameras are not included in this package?

    Installation Guide

    Before installing this case, please have a look at the pin positions on the Jetson Nano Developer Kit according to the following diagram.

    5

    Now, start assembling the case.

    1

    2

    Since this case offers a power button, reset button, and FR mode button, you need to disable the "AUTO ON" function by inserting one jumper cap into the “AUTO ON” and "DISABLE" pins of the J50 pinout to disable it.

    Another Jumper cap is used to toggle the power supply between Micro-USB and DC Jack. Insert this jumper cap into "J48" pinout to disable Micro-USB power (enable the DC 5V 4A jack PWR).

    The power button should be inserted into the “PWR BTN” and "GND" pins of J50.

    The reset button should be inserted into the “SYS RST” and "GND" pins of J50.

    4

    6

    7

    Part List

    • 1 x transparent acrylic case kit
    • 1 x Velcro cable tie
    • 1 x screwdriver
    • 2 x Reset metal switch button
    • 1 x illuminated metal switch button
    • 1 x silent fan (model 4010)
    • 4 x M3x40 hollow copper pillar
    • 4 x M2.5x5+5 copper pillar
    • 5 x M2.5 nuts
    • 4 x M2.5x4 screws
    • 8 x M2.0x8 screws
    • 8 x M2.0 nut
    • 4 x M2.5x9 screws
    • 5 x M2.5 screws
    • 4 x M3x16 fan screw
    • 4 x M3 nut
    • 1 x black tweezers
    • 1 x manual

    5

    HSCODE 3926909090
    USHSCODE 8471490000
    UPC

확대보기

문의하기

[114992370]Acrylic Case for Jetson Nano B01 with Cooling Fan, Dual Antenna Mounts, Power/FR/RESET Buttons

문의유형
제목
내용
답변알림
      • @
      • -
      • -

공유하기

대량구매 문의

상품명 [114992370]Acrylic Case for Jetson Nano B01 with Cooling Fan, Dual Antenna Mounts, Power/FR/RESET Buttons
성명
업체명
연락처
이메일
    • @
수량
유의사항
  • ※ 대량 구매문의를 해주셔서 감사합니다.
  • 문의가 접수 되는대로 빠른 시간내에 연락을 드리도록 하겠습니다.

신규 프로젝트

프로젝트 추가

결제 및 주문

  • 공정거래위원회
  • 홈택스
  • 연구비결제
  • 이노비즈
  • 마우저
  • 에스크로
  • 기업금융

공지사항 목록