• HOME

와이파이 마이크로 키트 Wi-Fi Micro Kit [114990337]

The RedBearLab Wi-Fi Micro is made based on CC3200 module by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s first single-chipARM Cortex-M4 core MCU with built-in Wi-Fi connectivity.
  • 와이파이 마이크로 키트 Wi-Fi Micro Kit [114990337]
    와이파이 마이크로 키트 Wi-Fi Micro Kit [114990337]

    보여지는 사진은 제품을 대표적으로 묘사하는 사진입니다. 정확한 규격은 제품의 데이터시트에서 확인하셔야 합니다.

      • 해외
    • 소비자가
    • 상품코드
    • 제 조 사
    • 마일리지
      0 IC
      마일리지 INFO

      마일리지 적립금은 상품 구매시 적립되는 형태가 아닌, 프로모 션 진행 시 혜택으로 적립되는 형태입니다. 자세한 관 련 내용을 보시려면 마이페이지>마일리지 메뉴에서 확 인하세요!

    • 배송기간
      7일~10일 이내
    • 재고위치
      해외 재고
    • 최소구매수량
  • 이 상품의 상품코드는 P006161406 입니다.

    와이파이 마이크로 키트 Wi-Fi Micro Kit [114990337]

    해당 제품은 재고 소진 해외에서 입고가 되는 제품으로 납기가 7~10일 정도 소요될 수 있습니다.  


    The RedBearLab Wi-Fi Micro is made based on CC3200 module by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s first single-chipARM Cortex-M4 core MCU with built-in Wi-Fi connectivity. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. They are offered to make you quickly produce prototypes and demos target for not only Internet of Thing (IoT) but also many other exciting and interesting projects. Such as Wi-Fi camera, Wi-Fi Audio, TFTP Client, TCP/IP OR UDP Server/Client, Http Server, XMPP Client, mDNS, etc.

    • TI CC3200 Dual core MCU: An ARM Cortex-M4 core at 80 MHz for application and a dedicated ARM core for Wi-Fi Network Processing
    • Industry’s first sully certified Wi-Fi module including FCC, IC, CE, ETSI, TELEC, and Wi-Fi Alliance
    • Easy Wi-Fi setup using TI’S Smart Config, Soft AP or WPS2
    • Over the Air (OTA) download application firmware from other Wi-Fi device or Internet
    • A lot of application examples provide by TI
    • TI-RTOS and Free-RTOS supported
    • Wide range of supply voltages and low-power consumption, less than 1uA current in hibernate mode
    • IoT Cloud platform integration ready including 2lemetry, Arrayent, Exosite, IBM, Temboo & Xively
    • You can program our boards with Arduino like syntax using Energia, an open-sourceed version of the Arduino IDE for TI MCU
    This is with MK20 USB board version, if you need it, please visit Wi-Fi Micro.
    CC3200 Wi-Fi consists of applications microcontroller, Wi-Fi network processor, and power-management subsystems:
    Applications Microcontroller Subsystem
    • ARM Cortex-M4 Core at 80 MHz
    • 256KB RAM, 1MB serial flash memory with file system for user
    • Hardware Crypto Engine for advanced fast security, including AES, DES, 3DES, SHA2 MD5, CRC and Checksum
    • Up to 27 individually programmable, multiplexed GPIO pins, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and dour-channel ADC
    Wi-Fi Network Processor Subsystem
    • Dedicated ARM MCU, completely offloads Wi-Fi and Internet protocols from the applications microcontroller
    • 802.11 b/g/n radio
    • WPA2 personal and enterprise security
    • Station, access point, and Wi-Fi direct modes
    • Powerful crypto engine for fast, secure Wi-Fi and internet connections with 256 bit AES encryption for TLS and SSL connections
    • SmartConfig technology, AP mode and WPS2 for easy and flexible Wi-Fi provisioning
    The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7uA of current.
    Microcontroller TI CC3200
    Operating Voltage 2.3V to 3.6V
    Input Voltage
    A: 2.3V - 3.6V 
    B: 3.3V - 5.5V (VIN)
    Cause: Use either one power source at a time, otherwise you will damage the board.
    Clock Speed 80MHz
    Wireless LAN (802.11 b/g/n @2.4GHz)
    Micro USB (CDC, virtual COM port)
    Serial (TX/RX)
    Parallel Camera
    Flash Memory 1MB (External Flash in Module)
    I/O Pins


    MK20 USB Board
    The MK20 (Freescale MK20DX128VFM5) USB board acts as a dongle, it accepts 5V from USB port and regulates to 3.3V via the onboard LDO which can be used to power BLE Nano. It appears on your computer as both a serial port and a removable mass storage disk. Please refer to the guide Getting Started with BLE Nano to learn how to deploy firmware using MK20 USB board.
    Since the BLE Nano can work as low as 1.8V, we have designed the MK20 USB board to run at 1.8V as well, simple short the switch S, then the regulator will outputs 1.8V instead. This would allow your BLE Nano to work with 1.8V components.
    Part List:
    • Wi-Fi Micro x 1
    • MK20 USB Board x 1



와이파이 마이크로 키트 Wi-Fi Micro Kit [114990337]

      • @
      • -
      • -


대량구매 문의

상품명 와이파이 마이크로 키트 Wi-Fi Micro Kit [114990337]
    • @
  • ※ 대량 구매문의를 해주셔서 감사합니다.
  • 문의가 접수 되는대로 빠른 시간내에 연락을 드리도록 하겠습니다.

신규 프로젝트

프로젝트 추가

결제 및 주문

  • 공정거래위원회
  • 홈택스
  • 연구비결제
  • 이노비즈
  • 마우저
  • 에스크로
  • 기업금융

공지사항 목록