Quick

  • HOME

IB51822 - BLE Development Kit [114990338]

IB51822 is an mbed enabled Bluetooth 4.0/4.1 Low Energy ARM Cortex M0 Development board based on nRF51822 chip from NordicSemi.
  • IB51822 - BLE Development Kit [114990338]
    IB51822 - BLE Development Kit [114990338]

    보여지는 사진은 제품을 대표적으로 묘사하는 사진입니다. 정확한 규격은 제품의 데이터시트에서 확인하셔야 합니다.

      • 무료
      • 해외
    • 소비자가
      견적문의요망
    • 상품코드
      P006161403
    • 제 조 사
      seeedstudio
    • 마일리지
      0 IC
      마일리지 INFO

      마일리지 적립금은 상품 구매시 적립되는 형태가 아닌, 프로모 션 진행 시 혜택으로 적립되는 형태입니다. 자세한 관 련 내용을 보시려면 마이페이지>마일리지 메뉴에서 확 인하세요!

    • 배송기간
      7일~10일 이내
    • 재고위치
      해외 재고
    • 최소구매수량
      1개
  • 이 상품의 상품코드는 P006161403 입니다.

    IB51822 - BLE Development Kit [114990338]

    해당 제품은 재고 소진 해외에서 입고가 되는 제품으로 납기가 7~10일 정도 소요될 수 있습니다.  

     

    IB51822 is an mbed enabled Bluetooth 4.0/4.1 Low Energy ARM Cortex M0 Development board based on nRF51822 chip from NordicSemi. IB51822 runs in SUPER LOW POWER, which means you can power it with a coin battery for a couple of months! You can use it to make your own IoT projects like smart watches, step-counter, sleep tracker, smart home switches, Amazon dash-button, Beacon, and all kind of sensor projects like heart-rate sensor, brain wave sensor, muscle sensor, etc. There're so many ideas that can be achieved with IB51822.

      
    It's designed with flexibility, easy to use with all pin-outs accessible for any requirements of project prototyping.
     
    IB51822 can be used with a variety of smart phone. Here's a list of devices that are known having the BLE supported:
     
    Apple smart devices:
    • iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPhone 6C and iPhone 6S.
    • iPAD, iPAD2, iPAD mini.
    Android phones:
    • Google Nexus 4, 5, 6, 7.
    • Samsung Note 3 / GT-I9300 / GT-I9500
    • Huawei Ascend P7
    • HTC One + Android OS v4.4.2+
    • HTC One M7 + Android OS v4.4.2+
    • Moto X/G + Android OS v4.4.2+
    • Samsung Galaxy S5
    • Sony Xperia E1 + Android OS v4.3
    • Sony Xperia Z1 + Android OS v4.4.4
     
    Features:
    CPU:
    • Single chip, highly flexible, 2.4 GHz 
    • 32-bit ARM Cortex M0 CPU core
    • 256kB flash + 16kB RAM, nRF51822 QFAA
    • Supports 16MHz XO, 16MHz RCOSC, 32MHx XO, 32kHz XO, 32kHz RCOSC
     
    mbed BLE Enabled
    • BLE 4.0/4.1 support
    • Support standard and custom GATT Profiles
    • Supports both BLE Central and Peripheral Roles.
     
    Peripherals
    • 3 x 16/24-bit timers with counter mode
    • 16 channel CPU independent Programmable Peripheral Interconnect (PPI)
    • Encryption -128-bit AES ECB/CCM/AAR co-processor
    • Random Number Generator
    • RTC
    • Integrated on chip temperature sensor
    • Flexible GPIO pin configuration
    • 31 GPIO
    • Up to 4 PWM
     
    Digital I/O
    • Digital interfaces -SPI Master/Slave, 2-wire I2C, UART
    • Quadrature decoder
     
    Analog I/O
    • 8/9/10 bit ADC - 8 configurable channels
    • Low power comparator
     
    Power Management
    • Wide supply voltage range (1.8v to 3.6V)
    • Flexible power management scheme
    • On-chip DC/DC converter
    • 600nA @ 3V OFF mode
    • 2.6μA @ 3V ON mode, all blocks in idle mode
    • 1.2μA @ 3V OFF mode + 1 region RAM retention
     
    Ultra low power consumption
    • 6.3mA - TX at -4dBm (3V using on-chip DC-DC)
    • 8.0mA - TX at 0dBm (3V using on-chip DC-DC)
    • 11.8mA ? TX at +4dBm (3V using on-chip DC-DC)
    • 9.7mA ? RX (3V using on-chip DC-DC)
    • 13mA ? RX at 1Mbps (No DC-DC)
    • 10.5mA ? TX at 0dBm (No DC-DC)
    • 0.6μA ? SYSTEM-OFF, no RAM retention
    • 1.2μA - SYSTEM-OFF, 8KB RAM retention
    • 2.6μA - SYSTEM-ON, All peripherals in idle mode
     
    2.4GHz Multi-protocol Radio
    • +4dBm to -20dBm output power in 4dBm steps
    • -30dBm output power in whisper mode
    • -96dBm RX sensitivity at 250kbs
    • -90dBm RX sensitivity at 1Mbps
    • -85dBm RX sensitivity at 2Mbps
    • 2 Mbps, 1 Mbps and 250kbs supported data rates
    • Excellent co-existence performance
     
     
    IBDAP is a fully CMSIS-DAP compatible debug adapter. It provides vendor independent debug interface for ARM 32-bit Cortex microcontrollers over JTAG/SWD interface. You can do debugging functions like stepping, breakpoints, watch points and firmware download etc. It's fully supported by Keil, OpenOCD, GNU GDB, IAR and other commonly used debugging tools.
     
     
    Part List:
    • 1 x Armstart IB51822 board
    • 1 x Armstart IBDAP board
    • 1 x 10-pin (0.05'') JTAG cable
    • 1 x IBDAPC10J20 20-pin (0.1'') to 10-pin (0.05'') JTAG adapter 
    • 2 x 2.54mm Pitch 40-Pin Break-apart Male Header

확대보기

문의하기

IB51822 - BLE Development Kit [114990338]

문의유형
제목
내용
답변알림
      • @
      • -
      • -

공유하기

대량구매 문의

상품명 IB51822 - BLE Development Kit [114990338]
성명
업체명
연락처
이메일
    • @
수량
유의사항
  • ※ 대량 구매문의를 해주셔서 감사합니다.
  • 문의가 접수 되는대로 빠른 시간내에 연락을 드리도록 하겠습니다.

신규 프로젝트

프로젝트 추가

결제 및 주문

  • 공정거래위원회
  • 홈택스
  • 연구비결제
  • 이노비즈
  • 마우저
  • 에스크로
  • 기업금융

공지사항 목록