Total power : 10 A Input voltages : 5V or 12V Input #of outputs : Single Output
- Delivers 10A of output Current - High efficiency - Low Output Ripple & Noise - Small size and low profile.....50.8mm×13.97mm×8.64mm(SIP Package) - Cost-efficient open frame design - Single-in-line(SIP) & SMT Package - Remote ON/OFF(active low) - Remote sense - Trimmable output voltage via external resistor - Output Over current protection - Over temperature protection - Weide Operating temperature range.....-40°C ~ 85°C
NOTE * Ripple & noise is tested/specified over a 20Mhz bandwidth and may be reduced with external filtering.
1.Typical at Ta =+25°C under nominal line voltage and full load conditions, unless otherwise noted. All models are tested and specified with external input and output capacitors. These capacitors are necessary to accommodate Our test equitment 2.Ripple & Noise is tested/specified over a 20MHz band wiath and may be reduced with external filtering. See I/O Filtering 3.These device have no minimum-load requirement and will regulate Under no-load conditions.Regulation specification describe the output voltage deviation as the line voltage or load is varied from its minimum value to either extreme.