Dual H-Bridge Motor Driver
5V의 5A용 듀얼 H 브리지 모터 드라이버입니다. 2개의 DC 모터를 제어하는데 편리하며 베틀 로봇이나 이동로봇의 모터를 제어하는데 편리하게 사용할 수 있습니다.
Voltage - 5v logic supply and 5v - 50v for the motor
Current - 50mA Max for logic and up to 5A for each motor
- 2 independent channels of:
0v - 2.5v - 5v Analogue for Reverse - Stop - Forward
- 0v - 2.5v - 5v Analogue for Reverse - Stop - Forward with second channel for steering.
- RC Mode - Controlled by standard Radio Control system. Direct connection to RC receiver. (1mS - 2mS pulse with 1.5mS center off).
- RC Mode - with the first channel controlling the speed and second channel for steering.
- I2C Interface, full direct control. Up to 8 modules on bus. Two modes of operation, direct control of motors or the ability to send a speed and a turn command.
Size - 110mm x 52mm x 25mm