PC와 연결 가능한 스코프 50MHz -
PC와 연동이 가능한 2채널 PC Scope입니다.
자세한 제품 사양은 다음을 참조하시기 바랍니다.
매뉴얼 다운로드 : www.velleman.be 에 가셔서
서치란에 PCS500을 기입하시면 화면 하단에서 다운로드 받으실 수 있습니다.
The PCS500 is a digital storage oscilloscope
that uses a computer and its monitor to display waveforms.
All standard oscilloscope functions are available through the supplied Windows program.
Its operation is identical to that of normal oscilloscope apart from the fact that all operations can be performed with the mouse.
Connection is through the computers parallel port
and the scope is completely optically isolated from the computer port.
The oscilloscope and transient recorder have two completely separated channels with a sampling frequency up to 1GHz.
Any waveform displayed on the screen can be stored for later
use in documents or for the comparison of waveforms.
comes with adapter: no
timebase: 20ns to 100ms per division
trigger source: CH1, CH2, EXT or free run
trigger edge: rising or falling
trigger level: adjustable in whole screen
step interpolation: linear or smoothed
markers for: voltage and frequency
input sensitivity: 5mV to 15V / division with auto setup-function
true RMS readout (only AC component)
recording length: 4096 samples / channel
real-time: 1.25kHz to 50MHz
frequency range: 0...1.2kHz to 25MHz
linear or logarithmic time scale
operating principle: FFT (Fast Fourier Transform)
FFT resolution: 2048 lines
FFT input channel: CH1 or CH2
markers for amplitude and frequency
time scale: 20ms/div to 2000s/div
max. recording time: 9.4hours/screen
automatic data storage
automatic recording for more than 1 year
max. number of samples: 100/s
min. number of samples: 1 sample / 20s
markers for time and amplitude
recording and display of screens
data format: ASCII
inputs: 2 channels, 1 external trigger input
input impedance: 1Mohm // 30pF
frequency response: 0Hz to 50MHz (± 3dB)
max. input voltage: 100V (AC " DC)
input coupling: DC, AC and GND
optically ISOLATED from computer
supply voltage: 9-10Vdc / 1000mA
minimum system requirements:
IBM compatible PC
Windows 95, 98, ME (Win2000 or NT possible)
SVGA display card (min. 800x600)
free printer port LPT1, LPT2 or LPT3
PC parallel cable
CD with software